ExtremeCloud Orchestrator v3.6.0 CLI Administration Guide

Run the following command to create a route map match of a certain match type.

efa policy route-map-match create [flags]
 
Flags:
      --name string                      Name of the route map
      --rule string                      Rule in format seq[seq-num],action[permit/deny]. Example: seq[5],action[permit]
      --match-ipv4-prefix string         IPv4 prefix-list name
      --match-community-list string      Community list name
      --match-extcommunity-list string   ExtCommunity list name

Example:

efa policy route-map-match create --name foo --rule seq[10],action[permit] --match-extcommunity-list extFoo
+----------------+---------+--------+
| Route Map Name | Seq num | Action |
+----------------+---------+--------+
| foo            | 10      | permit |
+----------------+---------+--------+
Route Map details
+---------------+---------+--------+-----------------+
|  IP Address   | Result  | Reason | Rollback reason |
+---------------+---------+--------+-----------------+
| 10.139.44.162 | Success |        |                 |
+---------------+---------+--------+-----------------+

Verify the switch configuration on SLX devices.

route-map foo permit 10
match extcommunity extFoo

Run the following command to remove a route map match of a certain match type.

 efa policy route-map-match delete [flags]
 
Flags:
      --name string                      Name of the route map
      --rule string                      Rule in format seq[seq-num],action[permit/deny]. Example: seq[5],action[permit]
      --match-ipv4-prefix string         IPv4 prefix-list name
      --match-community-list string      Community list name
      --match-extcommunity-list string   ExtCommunity list name

Example:

efa policy route-map-match delete --name foo --rule seq[10],action[permit] --match-extcommunity-list extFoo
+----------------+---------+--------+
| Route Map Name | Seq num | Action |
+----------------+---------+--------+
| foo            | 10      | permit |
+----------------+---------+--------+
Route Map details
+---------------+---------+--------+-----------------+
|  IP Address   | Result  | Reason | Rollback reason |
+---------------+---------+--------+-----------------+
| 10.139.44.162 | Success |        |                 |
+---------------+---------+--------+-----------------+

Verify the switch configuration on SLX devices.
```
route-map foo permit 10
!
```

Run the following command to set the standard and extended community list attributes.

The CLI sets the community list for deletion.

efa policy route-map-set create [flags]
 
Flags:
      --name string                       Name of the route map
      --rule string                       Rule in format seq[seq-num],action[permit/deny]. Example: seq[5],action[permit]
      --set-community string              --set-community [<1-4294967295>|<AA:NN, AA & NN is 2 bytes>|internet|local-as|no-export|no-advertise]. Example: 6550:125,local-as,internet
      --set-extcommunity-rt string        --set-extcommunity-rt [ASN:NN|IpAddress:NN, ASN & NN is 2 or 4 bytes | additive]. Example: 2:300,12.12.13.33:24
      --set-extcommunity-soo string       --set-extcommunity-soo [ASN:NN|IpAddress:NN, ASN & NN is 2 or 4 bytes]. Example: 32:124
      --set-communitylist-delete string   --set-communitylist-delete [community-list name]

Example:

efa policy route-map-set create --name foo --rule seq[10],action[permit] --set-community 6550:125,internet,local-as
+----------------+---------+--------+
| Route Map Name | Seq num | Action |
+----------------+---------+--------+
| foo            | 10      | permit |
+----------------+---------+--------+
Route Map details
+---------------+---------+--------+-----------------+
|  IP Address   | Result  | Reason | Rollback reason |
+---------------+---------+--------+-----------------+
| 10.139.44.161 | Success |        |                 |
+---------------+---------+--------+-----------------+
| 10.139.44.162 | Success |        |                 |
+---------------+---------+--------+-----------------+
Device Results
--- Time Elapsed: 10.33886575s ---

Verify the switch configuration on SLX devices.

SLX# show running-config route-map
route-map foo permit 10
set community 6550:125 local-as internet
!

Run the following command to delete the set directive on route map.

efa policy route-map-set delete [flags]
 
Flags:
      --name string                       Name of the route map
      --rule string                       Rule in format seq[seq-num],action[permit/deny]. Example: seq[5],action[permit]
      --set-community string              --set-community [<1-4294967295>|<AA:NN, AA & NN is 2 bytes>|internet|local-as|no-export|no-advertise]. Example: 6550:125,local-as,internet
      --set-extcommunity-rt string        --set-extcommunity-rt [ASN:NN|IpAddress:NN, ASN & NN is 2 or 4 bytes | additive]. Example: 2:300,12.12.13.33:24
      --set-extcommunity-soo string       --set-extcommunity-soo [ASN:NN|IpAddress:NN, ASN & NN is 2 or 4 bytes]. Example: 32:124
      --set-communitylist-delete string   --set-communitylist-delete [community-list name]

Example:

efa policy route-map-set delete --name foo --rule seq[10],action[permit] --set-community 6550:125,internet,local-as
+----------------+---------+--------+
| Route Map Name | Seq num | Action |
+----------------+---------+--------+
| foo            | 10      | permit |
+----------------+---------+--------+
Route Map details
+---------------+---------+--------+-----------------+
|  IP Address   | Result  | Reason | Rollback reason |
+---------------+---------+--------+-----------------+
| 10.139.44.161 | Success |        |                 |
+---------------+---------+--------+-----------------+
| 10.139.44.162 | Success |        |                 |
+---------------+---------+--------+-----------------+
Device Results
--- Time Elapsed: 11.547377938s ---

Verify the switch configuration on SLX devices.
```
SLX# show running-config route-map
route-map foo permit 10
!
```

Configure Route Map Match and Set of Community List

About this task

Procedure